Code : NITTO P-02

Specification :

Producer : NITTO

Nitto P-02 Double Coated Kraft Paper Tape is a highly versatile double-sided flatback paper tape that boasts super-aggressive adhesion. It is designed for a variety of splicing, mounting, holding, laminating and fastening applications. Nitto Denko P-02 is ideal for when tape conformability and strength are vital. It can be used with glass or metal surfaces. It is recommended for holding metal in place during machining operations (provides a secure, movement-free hold-down); for anchoring metal plates, type, cuts and patches to printing forms; and for mounting small fixtures, display items and moldings.

Nitto P-02 (used to be referred to as Permacel P-02) can be die-cut or shear-cut to any size or shape. It is coated on both sides with an aggressive, synthetic rubber/resin adhesive that makes it ideal for splicing medium-to-heavyweight paper stocks. It provides high shear strength, high initial tack and is solvent resistant (will not dissolve when exposed for limited periods to solvents such as MEK, carbon tetrachloride, gasoline or alcohol). Its liner removes easily, even after exposure to high pressure-laminating operations.

If not otherwise specified widths shown in dropdown are in inches. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 12mm x 33m. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.

Technical Information- Core: 3 inch diameter
- Backing/Carrier: flatback kraft paper
- Adhesive: synthetic rubber resin
- Release Liner: coated paper
- Standards Met: FDA Indirect Contact Title 21 Part 175 Subpart B Section 105; CID