1. Specification.
- VULCAN 51N is an adhesive component that glues all types of peroxide cured rubber (silicon, EPDM, HNBR) and plastic (nylon).
- It has not only outstanding adhesion but excellent corrosion resistance, oil resistance and chemical resistance.
- Easily applied in spray, dipping and brush work
- Even more time provided for product formation through outstanding prebake resistibility
-  Environment-friendliness
- Non-detection of 6 hazardous substances (Pb, Cd, Hg, Cr(Ⅵ) PBB,
PBDE).

2. Properties 

3. Application 
- It can be applied by spraying, dipping and brushing.
- The undiluted solution can be diluted at about 100 to 200% in ethanol or methanol.
- Generally, the vulcanization conditions such as temperature, pressure, pressing time, etc., are recommended from the silicon rubber manufacturer.
- The adhesive strength may increase if the plastic (nylon) surfaceis made rough.
- Nylon has absorption properties. Please apply after drying properly ensuring the solvent or humidity does not remain on the nylon after degreasing.
- It dries completely through prebake during 10 minutes at 200℃, and the adhesive strength increases.
* Suitable dilution proportion for each type of application can be obtained through experience.

4. How to use for VULCAN 81
① Do not mix remains from used products with new products.
② Please apply after removing completely oil, humidity, dust, etc. from the surface to be applied.
③ The recommended molding temperature is of 140℃~180℃.
④ It is generally recommended Prebake for 10 minutes at 200℃, but when the working conditions are not smooth, please dry at high temperature until the solvent evaporates completely from the plastic surface.

5. Package
  - 10kg/Can