ZYP Coating's “BN Aerosol Brushable” is the same formulation that is used in our BN Aerosol spray can ... but is in BULK paint form, sold by the gallon. The BN Aerosol Brushable can be applied by brushing, traditional air-spraying means, or dipping. Usable in any environment from room temperature to over 1000 C (1832 F).   BN Aerosol Brushable can be diluted with Acetone for somewhat faster drying or with Ethyl Alcohol for somewhat slower drying.

Specifications

Active Ingredient BN Max Use Temperature Air 1832 F / 1000 C Vac 2552 F / 1400 C Inert 3272 F / 1800 C Use Atmosphere All Fired Composition (Air@700 C) >95% BN Liquid Carrier Ethanol/Acetone Binder Phase Magnesium Silicate Brookfield Viscosity (cps) 300-600 @3/60 Specific Gravity 1.0 Color White Shelf Life (months >12 Coverage (ft2 /gal.) 100-400 H F R Ratings 1-3-0 Substrate Use All Other: Nearly water insoluble after drying Can be used at cryogenic temperatures

Key Attributes

• Fast Drying, Solvent Based

• Easy-to use

• Dilutable with Acetone and/or Ethanol

• Apply like housepaints

Ideal Use

• Reducing Friction

• Providing Release

• Barrier Layer

• Anti-Stick with Molten Al, Mg, & Zn

Use Notes

1. Resuspend if needed.

2. Clean surfaces to be painted of any oils dirt, scale, etc.

3. Apply one thin layer by brush, dip or air-spray

4. Allow to dry at room temperature. before use. Generally less than

5 minutes. Recoat if needed.

Safety Information

• Consult SDS before use.

• Avoid breathing of vapors.

• For Industrial use only.