BN Aerosol Lubricoat® is a convenient aerosol can for applying thin, uniform, quick-drying layers of BN onto most any substrate. The aerosol can allows the creation of a dry-film-lubricant and provides the great properties of BN in an easy-to-use/test manner – low electrical conduction; high thermal conduction (like stainless); prevent reactions/interactions between materials; superior release/nonwetting.

Specifications

Active Ingredient BN Max Use Temperature Air 1832 F / 1000 C Vac 2552 F / 1400 C Inert 3272 F / 1800 C Use Atmosphere All Fired Composition (Air@700 C) 97% BN Liquid Carrier Ethyl Alcohol/Acetone Gas Propellant Propane/Butane Binder Phase Magnesium Silicate Color White Shelf Life (months >12 Coverage (ft2 /aerosol-can) 30-50 H F R Ratings 2-4-0 Substrate Use All Other: Nearly water insoluble after drying Can be used at cryogenic temperatures

Key Attributes

Anti-stick: • Molten Al, Mg, & Zn

• Hot-Pressing

• Glass Forming

• Weld Spatter

• Braze Stop-Of High-temperature Lubrication:

• Extrusion

• Superplastic Forming

• Stops galling

• Dry-Film Lubricant (DFL)

Ideal Use

• Reducing Friction

• Providing Release

• Barrier Layer

Use Notes

1. Clean surfaces to be painted of any oils dirt, scale, etc.

2. Shake can until mixing ball is heard & for 1 minute more

3. Hold can 6 to 12 inches from surface & apply thin/uniform coating using even movements

4. Allow to dry for 1 to 2 minutes and respray as needed

Safety Information

• Consult SDS before use

.• Avoid breathing of spray/vapors.

• For indrustrial use only