BN Lubricoat®-ZS is the same as our regular BN Lubricoat® except for using a hydrochloric-acid “peptizer” instead of nitric-acid. The “ZS” version is thus somewhat better in adherence and also more dilutable with water than our regular BN Lubricoat. The “ZS” works well as long as the surface/substrate is OK with this type of acidic (like lemon juice) carrier.

Specifications

Active Ingredient BN Max Use Temperature Air 1800 F / 1000 C Vac 2552 F / 1400C Inert 3272 F / 1800C Use Atmosphere All Fired Composition >85% BN Liquid Carrier Water Binder Phase AI2 O3 Active Ingredient Level Fully Loaded Brookfield Viscosity (cps) 1500-2500 @4/60 Specific Gravity 1.2 Color White, except when specified blue Shelf Life (months >12 Coverage (ft2 /gal) 100 to 400 Coating pH 2-4 H F R Ratings 1-0-0 Substrate Use All

Key Attributes

• Totally Non-Wetted by Molten Aluminum, Magnesium, Zinc and Their Drosses

• Acts Like Teon® to Molten Metal

• Protects Ceramics, Metals and Graphite

• Maintenance is Reduced and Operator Satisfaction Maximized

• Dilutable to Most Any Level

• Applied Like House paint

• Safe, Water-Based, No VOC's

Ideal Use

• Launders & Runners

• Auto-Pour Ladles

• Troughs & Tubes

• Funnels & Spouts

• Filter Bowls, Boxes

• Caster Tips

• Dross Press Heads

Use Notes

1. Resuspend if needed. OK to dilute with water with 2 parts water to 1 part coating as normal.

2. Clean surfaces to be painted of any oils dirt, scale, etc.

3. Apply one thin layer by brush, dip, or spray like ordinary house paint

4. Allow to dry thoroughly before use.

Safety Information

• Consult SDS before use.

• Avoid breathing of spray/vapors.

• For Industrial Use only