BN Releasecoat® is a relatively-soft, washcoat

-type of coating with a lower BN content

which still provides excellent nonwetting and

release with aluminum, magnesium, zinc and

other nonferrous metals and alloys.

Specifications

Active Ingredient BN

Max Use Temperature Air 1832 F / 1000 C Vac 2552 F / 1400 C Inert 3272 F / 1800 C

Use Atmosphere All

Fired Composition >85%

BN Liquid Carrier Water

Binder Phase Magnesium Silicate

Active Ingredient Level Low Loading

Brookfield Viscosity (cps) 300-500 @2/60

Specific Gravity 1

Color White, except when specified blue

Shelf Life (months) >12

Coverage (ft2 /gal) 100

to 400 Coating pH 7-8

H F R Ratings 1-0-0

Substrate Use All

Key Attributes

• Perfect for top-coating over thermal insulating coatings.

• Provides “cosmetic”/mirror-like surface finish with excellent mold release

• Ideal for low-draft, high-drag regions for wheel casting

• Easily applied by air spraying on to hot or cold molds

• Readily touch up molds while hot

• Safe, water-based

Ideal Use

• Permanent Molds

• Low Pressure or Gravity Die casting

Use Notes

1. Resuspend if needed. Can dilute with water.

2. Clean surfaces to be painted of any oils dirt, scale, etc.

3. Apply 1-3 layers by brush or spray like ordinary house paint, drying after each layer

4. Allow to dry thoroughly at room temperature before use.

Safety Information

• Consult MSDS before use.

• Avoid breathing of spray/vapors.

• For Industrial Use only.